Menu
Your Cart
Raspberry PI 3 Model B+ Available Shop now

AM2302 Temprature and Humidity Sensor in Pakistan

The AM2302 is a wired  in a large plastic body. It is a basic, low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old.

Simply connect the red 3-5V power, the yellow wire to your data input pin and the black wire to ground. Although it uses a single-wire to send data it is not Dallas One Wire compatible!

Write a review
Note: HTML is not translated!
Bad Good

AM2302 Temprature and Humidity Sensor in Pakistan

  • Availability: In Stock
  • Product Code: Arduino Sensor
  • Weight: 0.00kg
Product Views: 118
Rs 450.00