Battery Charger Protection Board is 3S 10A board. Battery Charger Protection Board with 10.8V rated voltage for polymer battery, 11.1V 18650 or 3.7V lithium battery rated voltage and 12.6V lithium battery can be charged. And discharge 10A (referring to the maximum dis..
This is 4 Channel 5V Solid State Relay Module Board OMRON for Arduino. The range of relays with the variety of channels are available at mreeco.com check them now by searching relay module in mreeco.com.
Compares with the traditional mechanical relay, the Solid State Relay (SSR) has many advantag..
The 5V 2 Channel Relay Module in Pakistan Shield provides a solution for controlling high current devices that cannot be controlled by the Arduino’s Digital I/O pins due to their current and voltage limits.The Relay Shield features four high quality relays and provides NO/NC interfaces, four dynamic..
65pcs Breadboard Jumper Cables For Arduino Ideal for creating circuits between your microcontroller and the breadboard on the botsReusable for fast build a prototype of an electronic circuitSoldering is not requiredCan modify or revise the circuits easilyWire Length:Approx. 9.8 inch / 25cm..
Thanks to Arduino Due, the user can create systems using the ARM 32-bit Cortex M3 microcontroller based on Arduino libraries. The board contains Atmel AT91SAM3X8E chipset, equipped with 54 digital inputs / outputs, of which 12 can be used as PWM outputs and 12 as analog A / C converter inputs. The c..
Arduino Leonardo is one of the most popular versions from the series. The board contains an ATmega32u4 microcontroller equipped with 20 digital I / O, 7 of which can be used as PWM outputs (eg for motor control) and 12 as analogue inputs. The clock is clocked at 16 MHz, has 32 kB of Flash memory and..
Arduino Mega is one of the richest versions. The board contains the ATmega2560 microcontroller, equipped with 54 digital I / O, 15 of which can be used as PWM outputs (eg for motor control) and 16 analog inputs. The clock is clocked at 16 MHz, has 256 kB of Flash memory and 8 kB of SRAM.Sp..
Digital 8-Bit TM1638 LED Module For Arduino PIC AVR contain eight 7-segment red LED digits, eight red/green LEDs and also eight buttons for user input. For Arduino use, pins 1~4 are the minimum necessary to use one module. Each additional module will require another digital pin connected to STB..
Specification:Input: 9V-36VOutput: 5V / 3A (MAX)Efficiency: 92% (MAX)Switching frequency: 150KHZOperating temperature: -40 ℃ – + 85 ℃Load capacity: Maximum output 3A (at the same time with two mobile phones)Application: mobile power, mobile phones, flat-panel USB5V powered devicesPackage included:1 ..
Can easily measure the operating current of the output voltage of the USB port and equipment 2. smallsize , no power , and other ancillary equipment, plug and play also detect USB charger output voltage and current are standard suitable for factories, Laboratory and users.Technical indicators:Scope ..
Hot MeltsTo ensure the best bonding results, a compatible hot melt adhesive is essential for each glue gun and application. Hot melts vary in width and length and are generally in the form of waxes, resins and a variation of thermoplastic polymers. The chemical composition of hot melts varies, becau..
Ultrasonic sensor operating in the range of 2-200 cm. Powered by 5 V. The output is a signal whose duration is proportional to the measured distance.SpecificationPower supply: 5 VAverage power consumption: 15 mAMeasuring range: from 2 cm to 200 cmOutput: frequency signalOperating frequency: 40 ..