Power Supply

150w DC To DC Boost Converter 10 32v To 12 35v 6a Step Up Power Supply Module

Condition: New
Availability: In Stock
Share:     Faceook Twitter

SKU: 637736193820559032

Rs.550 Rs. 688

This 150W DC-DC Boost Converter 10-32V to 12-35V module allows you to step up an input voltage as low as 10V and set the output to 12V-35V. The output voltage will be higher than the input voltage. The boost converter design is based on popular Texas Instrument’s UC3844 current mode PWM controller chip.

Applications

  • Run Laptop on DC12V Car battery . (Laptops usually require 17V – 18V DC.)
  • Run Communication equipment on single 12V lead acid battery that is rated for operation at 24V to 35V
  • Run Higher voltage (24V – 35V) DC motors used in Robots using single 12V batteries

Technical Specifications

  • Input Voltage: 10v – 32v DC
  • Output Voltage: 12v – 35v DC
  • Output Current: 6A MAX
  • Input Current: 10A (MAX)
  • Output Ripple: 2% MAX
  • Working Temperature: Industrial – 40C to +85C (Environmental temperature, more than 40C, reduce load wattage or enhance cooling)
  • Full-Load temperature: 45 degrees.
  • No-load current: 25mA typical.
  • Voltage regulation: ± 0.5%.
  • Load regulation: ± 0.5%.
  • Dynamic response speed: 200uS 5%.
  • Short circuit protection: None (Please Install fuses and protection circuits at Input port.)
  • Input Reverse Polarity Protection: None (Please Series diode at the input port.)
  • Size: 2.60 in (L), 1.85 in (W) , 1.1 in (H)
  • Weight: 2.30 oz (66 g)

[!] Warnings

  • Does NOT limit current, do not overload!
  • The maximum rated values should NEVER be continuous from the load or else the module will be damaged.
  • Be sure to install correct circuit protection, such as fuses, to the input of the module to avoid overloading and the potential for fire.
  • Please enhance heat dissipation above 50W
  • Failure to take these precautions and incorrect use of this module may result in damage, fire, and/or personal injury.

Documents and Downloads

    • UC3844 Current mode PWM controller Datasheet
    • UC3844 Based Boost Converter Schematics

Package Includes

    • 1x OSKJ 150W DC-DC Boost Converter 10-32V to 12-35V – 6A Output module

Documents and Downloads

    • UC3844 Current mode PWM controller Datasheet
    • UC3844 Based Boost Converter Schematics

Package Includes

    • 1x OSKJ 150W DC-DC Boost Converter 10-32V to 12-35V – 6A Output module

Based on 1 reviews

5

overall

Add a review

Naveed - July 07, 2022