soldering paste high quality

Goot Soldering Paste BS-10.

High quality soldering paste

made in japan

Product Description:

A surface to be joined that is oily or oxidized will prevent solder from spreading during soldering. This soldering paste removes such oil or oxides and improves wettability. Assists soldering of electrical wiring and electrical components in hobby kits.

How to use:

Using the end of a match or toothpick, apply a little soldering paste to the leads that will be solderedPlace the soldering iron tip over the leads.Contact the solder against these leads. Heat the solder till it flows freely, then quickly move the soldering iron and solder away.How to clean:Using the cotton swab apply a little IPA (isopropyl alcohol) on the stain and wipe it off using tissue paper or a piece of cotton. Remove it completely to avoid surface corrosion.CAUTION:This soldering paste is acidic. Flux residue should be removed toa void surface corrosion. Not water-soluble.BS-10 is not suitable for use on PCBs. Applying BS-10 to printed circuit boards could result in electric leakage leading to fire as BS-10 contains electrolyte(a conductive substance).Do not dip the soldering iron tip directly into the soldering paste.

Composition and content:

Vaseline - 80- 90%Zinc chloride - 4- 6%Ammonium choride - 1- 3%Paraffin - 6- 9%Water - 2-4%

Package Content:

1 pc Soldering Paste Goot Bs-10 - net 10g

• SKU: 637736200169122149
• /
• Category: Car Electronics
• /
• Tags: soldering paste