Your Cart
اپناآڈر پلیس کرنے کے بعد ہمیں اس نمبرپر 03429472107 کال یا وٹس ایپ کرکےآڈر نمبر بتا آڈر کنفرم کروائیں۔ تاکہ آپ کے آڈر کو جلدازجلد شپ کیا جاسکے۔ شکریہ

Strain Gauge Bending Detection Sensor Module in Pakistan

Strain Gauge Bending Detection Sensor Module in Pakistan

The working principle is based on resistance strain gauge strain effect produced, i.e., when the conductor or semiconductor material mechanical deformation under the action of external force, the resistance value of the corresponding changes, a phenomenon known as “strain effect.”

The strain gauge attached to the object to be measured, so that as the strain of the measuring object bent together, so that the inside of the metal foil is bent with the strain. Many metal when mechanically bending its resistance changes.

* Element Introduction:
* Model: BF350-3AA / 1.5AA
* Sensitivity coefficient: 2.0
* Strain limit: 2%
* Gate wire: length x width 2×3.5mm
* Base dimensions: length x width 5×4.5mm
* Base material: modified phenolic substrates.
* Gate wire material: constantan
* Resistance: 350 Ohm
*Fatigue Life:> 10 million times
* Flux: ordinary solder rosin

Voltage: 5V
Reverse protection diode ~ (to prevent power reversed)
Board with a blue LED power indicator
Analog Output: The higher curvature ,the greater of the output voltage.
Output analog voltage: 0-3.5V
Board size: 32 X 17mm
Behind the printed board pin definitions (Bending strain gauge, you can change the output voltage)

Write a review

Note: HTML is not translated!
Bad Good
Strain Gauge Bending Detection Sensor Module in Pakistan
  • Stock: In Stock
  • Model: Arduino Sensor
Product Views: 772
Rs 650.00