The gravity arduino turbidity sensor detects water quality by measuring the levels of turbidity. It uses light to detect suspended particles in water by measuring the light transmittance and scattering rate, which changes with the amount of total suspended solids (TSS) in water. As the TTS..
Ultrasonic sensor operating in the range of 2-200 cm. Powered by 5 V. The output is a signal whose duration is proportional to the measured distance.SpecificationPower supply: 5 VAverage power consumption: 15 mAMeasuring range: from 2 cm to 200 cmOutput: frequency signalOperating frequency: 40 ..
HC-SR501IR PIR Motion Sensor Detector Module is popular for sensing motion using infrared technology with automatic detection. It includes a pyroelectric infrared sensor. It has a detection range below 120° and detection distance adjustable between 3 to 7 meters. It also has a wide operati..
KY-036 Human Body Touch Sensor Module (KY-036) is triggered at a touch of the sensor. This module works on 5V and has an adjustable sensitivity through the built-in potentiometer.TECH DETAILS:Operation voltage 3.3 V, 5 VTemperature range of -40 °C to 85 °CCurrent input/output max &nbs..
1. IR Infrared Obstacle Avoidance Sensor Module sensor when detects an obstacle in front of the signal , the green indicator light on the board level , while low-level continuous output signal OUT port , the module detects the distance 2 ~ 30cm, detection angle 35 °, the distance can detec..
KY-026 Flame Sensor Module is a sensor for flame wavelengths between 760 nm to 1100 nm infrared is most sensitive 60 degree detection sensor Two outputs mode: AO: analog output- real-time output voltage signal on the thermal resistance; DO: when the temperature reaches a certain threshold- the ..
KY-028 Temperature Sensor Module and a digital interface, built-in 13 LED build a simple circuit, making the temperature warning lamp 13 comes with digital interfaces of the LED, the digital temperature sensor connected digital three interfaces, when the digital temperature sensor senses a..
For Light intensity detected,light brightness sensors,Smart car moduleUsing the sensitive type photosensitive resistance sensorWaveform of the comparator output signal is good,strong driving abilityWith adjustable potentiometer can adjust and detect the brightness of the lightCome with bolt holes fo..
The TCRT5000(L) has a compact construction where the emitting-light source and the detector are arranged in the same direction to sense the presence of an object by using the reflective IR beam from the object. The detector consists of a phototransistor.Specifications:Path tracing sensors, robots ma..
KY-024 Linear Magnetic Hall Sensor Module is an analog/digital module with a built-in potentiometer to adjust the sensitivity of the sensor. Analog output (AO) works in the same way as on the KY – 003. Digital output (DO) allows for a pure HIGH/LOW detection and adjusting the sensiti..