Menu
Your Cart
اپناآڈر پلیس کرنے کے بعد ہمیں اس نمبرپر 03429472107 کال یا وٹس ایپ کرکےآڈر نمبر بتا آڈر کنفرم کروائیں۔ تاکہ آپ کے آڈر کو جلدازجلد شپ کیا جاسکے۔ شکریہ

DC 0 To 25V Standard Voltage Sensor Module For Arduino

DC 0 To 25V Standard Voltage Sensor Module For Arduino

DC 0 To 25V Standard Voltage Sensor Module For Arduino module is based on a resistive divider design principles, can reduce the voltage of the input terminal connection five times, Arduino analog input voltage up to 5V, then the input voltage of the voltage detection module can not be greater than 5V × 5 = 25V (3.3V if used system, the input voltage does not exceed 3.3Vx5 = 16.5V). Because Arduino AVR chips used in 10 AD, so the simulation resolution of this module is 0.00489V (5V / 1023), so the voltage detection module detects minimum input voltage is 0.00489V × 5 = 0.02445V.

DC 0 TO 25V STANDARD VOLTAGE SENSOR MODULE FOR ARDUINO PARAMETERS:

Input voltage range: DC0-25V
Voltage detection range: DC0.02445V-25V
Voltage analog resolutions: 0.00489V
DC Input: positive terminal connected to VCC, GND negative pole
Output interface: “+” then 5 / 3.3V, “-” then GND, “s” then the AD Arduino pin
 Reference Code:
#include <Wire.h>
int val11;
int val2;
void setup ()
{
 pinMode (LED1, OUTPUT);
 Serial.begin (9600);
 Serial.println (“Emartee.Com”);
 Serial.println (“Voltage:”);
 Serial.print (“V”);
}
void loop ()
{
 float temp;
 val11 = analogRead (1);
 temp = val11 / 4.092;
 val11 = (int) temp; //
 val2 = ((val11% 100) / 10);
 Serial.println (val2);
 delay (1000);
}

Write a review

Note: HTML is not translated!
Bad Good
DC 0 To 25V Standard Voltage Sensor Module For Arduino
  • Stock: In Stock
  • Model: AC Voltage Sensor
  • Weight: 0.01kg
Product Views: 779
Rs 50.00