Your Cart
Raspberry PI 3 Model B+ Available Shop now

TP4056 Lithium Cell Charger Module 5V 1A

-18 %

Charge module
Condition: New
Size: approx. 2.6 x 1.7cm/ 1.02″ x 0.67″
Input voltage: 5V
Charging cut-off voltage: 4.2V ±1%
Maximum charging current: 1000mA
Cell overdischarge protection voltage: 2.5V
Cell overdischarge protection current: 3A
Charging and protect circuit at the same time
LED indicator- red is charging Green is full charged
Micro USB female outlet for input end, can be used to charge the lithium battery by phone charger directly. Besides, it still retain the input voltage wiring welding spot, good for DIY
“OUT+” and “OUT-” may have no output voltage when you connect them first time. You can protect circuit by accessing 5V voltage. Same as “B+” and “B-” area.
If you use phone charger to charge this device, please be sure the input current over 1A, otherwise, it may won’t run properly.
Connect “B+”to positive electrode of battery and “B-” to the anode. Connect “Out+”and “Out-” to load.
Please disconnect the load when charging and connect the right electrode

Write a review
Note: HTML is not translated!
Bad Good

TP4056 Lithium Cell Charger Module 5V 1A

  • Availability: In Stock
  • Product Code: Arduino Module
  • Weight: 0.05kg
  • SKU: B10500
Product Views: 514
Rs 110.00
Rs 90.00