MACH3 USB CNC Interface Board BL-UsbMach-V2.0 MACH3 CNC Board
MACH3 USB CNC Interface Board BL-UsbMach-V2.0 MACH3 CNC Board
MACH3 USB CNC Interface Board BL-UsbMach-V2.0 MACH3 CNC Board
MACH3 USB CNC Interface Board BL-UsbMach-V2.0 MACH3 CNC Board
Motor Drivers

MACH3 USB CNC Interface Board BL-UsbMach-V2.0 MACH3 CNC Board

(1 customer reviews)
Condition: New
Availability: In Stock
Share:     Faceook Twitter

SKU: 637736384123568018

Rs.5000 Rs. 6250
Quantity
Add to Cart

5-Axis

    • 100KHz
    • USB
    • CNC
    • Controller
    • Card
    • for
    • Mach3
    • lets
    • you
    • use
    • any
    • Windows
    • Computer
    • to
    • be
    • used
    • as
    • CNC
    • Machine
    • Controller.
    • Previously
    • with
    • LPT
    • Port-Based
    • Cards,
    • the
    • user
    • was
    • limited
    • to
    • use
    • only
    • older
    • computers
    • which
    • had
    • LPT
    • Port.

    With

    • this
    • New
    • CNC
    • Control
    • Board,
    • you
    • can
    • even
    • run
    • Mach3
    • on
    • a
    • Windows
    • Tablet
    • which
    • can
    • give
    • a
    • more
    • compact
    • and
    • professional
    • look
    • to
    • your
    • CNC
    • Machine.

    class='font-size-24
    • mb-3'>Technical
    • Specifications class='font-size-14
    • pl-3
    • ml-1
    • text-gray-110'>
  • PWM
    • output
    • is
    • available
    • (
    • (
    • photocoupler
    • separated,5V)
    • ，can
    • be
    • used
    • to
    • control
    • the
    • spindle
    • speed
    • controller
    • that
    • controlled
    • by
    • PWM.
  • Four
    • output
    • ports
    • are
    • available，
    • can
    • be
    • connected
    • to
    • relay
    • modules
    • with
    • photocouplers,
    • to
    • control
    • flood
    • and
    • mist,
    • etc.
    • Mach3
    • USB
    • interface
    • board
    • BL-UsbMACH-V20
    • manual
    • It
    • can
    • be
    • connected
    • to
    • stepper
    • motor
    • drivers
    • using
    • common
    • anode
    • or
    • common
    • cathode
    • input
    • connection. class='font-size-24
    • mb-3'>Note:
    • stepper
    • motor
    • drivers
    • should
    • have
    • photocouplers
    • for
    • input.
  • Also,
    • provide
    • 5
    • axis
    • XH2.54-4P
    • 2.54mm
    • Socket
    • Connector
    • ，make
    • it
    • is
    • easy
    • to
    • connect
    • to
    • the
    • stepper
    • motor
    • drivers.
    • stepper
    • motor
    • drivers.
  • All
    • the
    • port
    • names
    • are
    • printed
    • on
    • board,
    • Easy
    • to
    • be
    • used class='font-size-24
    • mb-3'>Specifications: class='font-size-14
    • pl-3
    • ml-1
    • text-gray-110'>
  • Part
    • Number:
    • BL-USBMach
    • V2.0
  • No
    • of
    • Axis:
    • 5
    • (you
    • can
    • connect
    • 5
    • stepper
    • motor
    • drives
    • or
    • servo
    • drives)
  • Maximum
    • step-pulse
    • frequency:
    • 100KHz
    • (suitable
    • for
    • smooth
    • servo
    • or
    • stepper
    • motion)
  • Automatic
    • probe
    • tool
    • Support:
    • Yes
  • Emergency
    • input:
    • Yes
  • Limit
    • switches:
    • Yes
    • (5
    • general-purpose
    • inputs,
    • you
    • can
    • connect
    • the
    • limit
    • switch,
    • estop
    • switch,
    • probe
    • switch,
    • back
    • to
    • zero
    • and
    • other
    • device)
  • Electronic
    • handwheel
    • Support:
    • Yes
  • Optical
    • Isolation
    • between
    • USB
    • Side
    • Control
    • and
    • External
    • inputs:
    • Yes
  • External
    • Voltage:
    • 12V/24V
  • Spindle
    • Control
    • Output:
    • Yes
    • (0-10V
    • output
    • port)
    • with
    • Spindle
    • Direction
    • (FWD)
    • output
  • Isolated
    • Outputs:
    • 4
    • general-purpose
    • isolated
    • relay
    • drive
    • output
    • interface
    • (can
    • drive
    • four
    • relays
    • for
    • controlling
    • the
    • spindle
    • starts,
    • forward
    • rotating
    • and
    • reverse
    • rotating,
    • pumps
    • and
    • other
    • device)
  • Power
    • Status
    • LED:
    • 1
    • Status
    • LED
    • (indicate
    • Power
    • status
    • of
    • the
    • controller
    • board)
  • Size:
    • 9x6cm
    • /
    • 3.54×2.36in
  • Tested
    • with
    • the
    • following
    • Operating
    • Systems:
    • class='font-size-14
    • pl-3
    • ml-1
    • text-gray-110'>
  • Windows
    • XP
    • (direct)
  • Windows
    • 7
    • 64bit
    • /32Bit
    • (direct)
  • Windows
    • 10
    • (Indirect
    • using
    • Windows
    • XP
    • on
    • VMWare) class='font-size-24
    • mb-3'>Setup
    • Instructions class='font-size-14
    • pl-3
    • ml-1
    • text-gray-110'>
  • Step
    • 1:
    • Install
    • Mach3:
    • If
    • you
    • already
    • have
    • a
    • Mach3
    • Installed,
    • skip
    • this
    • step.
  • Step
    • 2:
    • Download
    • the
    • USB
    • Motion
    • Driver
    • BL-UsbMach-V22.dll
    • and
    • copy
    • and
    • paste
    • the
    • file
    • into
    • your
    • Mach3
    • Plugins
    • folder
    • Example:
    • “C:/Users/ProgramFiles/Mach3/Plugins”
  • Step
    • 3:
    • Make
    • sure
    • your
    • board
    • is
    • connected
    • to
    • the
    • PC
    • via
    • USB
    • cable.
    • It
    • should
    • automatically
    • recognize
    • the
    • USB
    • device.
  • Step
    • 4:
    • Open
    • Mach3
    • and
    • you
    • should
    • be
    • prompted
    • to
    • select
    • a
    • driver.
    • Select
    • the
    • “USBMach
    • V2.0”
    • and
    • check
    • “Don’t
    • ask
    • me
    • again”.
    • This
    • will
    • allow
    • your
    • board
    • to
    • communicate
    • with
    • Mach3.
  • Step
    • 5:
    • Download
    • the
    • XML
    • Mach3
    • Config
    • File
    • above
    • by
    • right-clicking
    • on
    • the
    • link
    • and
    • selecting
    • “save
    • as”.
    • Save
    • the
    • Mach3Mill.xml
    • file
    • in
    • your
    • Mach3
    • root
    • folder. class='font-size-24
    • mb-3'>Note: class='font-size-14
    • pl-3
    • ml-1
    • text-gray-110'>
  • An
    • additional
    • power
    • source
    • is
    • required
    • for
    • the
    • limit
    • switches
    • and
    • spindle
    • portion
    • of
    • the
    • board.
    • This
    • Interface
    • board
    • is
    • not
    • compatible
    • with
    • Windows
    • 10
    • however
    • you
    • can
    • install
    • virtual
    • OS
    • using
    • VMWare
    • to
    • install
    • Windows
    • XP
    • on
    • a
    • Windows
    • 10
    • Machine.
    • To
    • learn
    • more
    • about
    • this
    • process
    • read
    • this
    • article class='font-size-24
    • mb-3'>Documents
    • and
    • Downloads class='font-size-14
    • pl-3
    • ml-1
    • text-gray-110'>
  • Download
    • Mac3Mill.xml
    • file
  • Download
    • BL-UsbMach-V22.dll
  • User
    • Guide
    • PDF
    • Document
    • class='font-size-24
    • mb-3'>User
    • manual: Download
    • Mach3
    • software,
    • download
    • and
    • install
    • instructions
    • Click
    • Me
    • For
    • Software Unload
    • folder
    • and
    • install
    • Mach3
    • software. Copy
    • the
    • entire
    • Mach3
    • directory
    • in
    • the
    • floppy
    • file
    • to
    • the
    • Mach3
    • directory
    • installed
    • on
    • your
    • machine. Plugin
    • your
    • computer
    • via
    • USB,
    • no
    • driver
    • required. Open
    • Mach3Mill
    • software
    • and
    • select
    • BL-USBMach-V2.2
    • Card. Pressing
    • reset,
    • the
    • X,
    • Y,
    • Z,
    • A,
    • B
    • controllers
    • will
    • see
    • the
    • corresponding
    • pulse
    • output. class='font-size-24
    • mb-3'>Package
    • Includes 1x
    • 5-Axis
    • 100KHz
    • USB
    • CNC
    • Controller
    • Card
    • for
    • Mach3
    • –
    • BL-USBMACH
    • V2.0
    • (QC-OK/Tested)

    • Based on 1 reviews

    5

    overall

    Add a review

    Zuhair - July 07, 2022

    Related Products